VIDEO: https://www.youtube.com/watch?v=Dr1_mBvww5k&feature=youtu.be
Theory:
ULTIMATE HAIR CARE works by penetrating 0.26nm water molecules into hair for replenishing water and moisturizing hair, promoting the penetration and chemical reaction of solution as the new generation hair care instrument. The nanometer water molecule with potential heat energy output from the instrument can smoothly pass the 1nm hair cuticle, reach the core of hair for replenishing water, nutrition and solution with the functions of repairing hair and enhancing the reaction of solution.
>>Humectant : Hair ULTIMATE HAIR CARE, takes moisture directly to the heart of the hair, passing through hair scales, as drop is just 0.26nm.
>>Restores in short time : dry scalps or problem scalp with sebum excess or dandruff , ULTIMATE HAIR CARE enters directly into the pores of the scalp and cleanse them deeply : disorders of the skin are then resolved & skin regains a normal PH .
(This type of device is also used in hospital for caring wounds, with surprising results that exceed all other methods of care - clinical studies are so many - !)
>> If you use a capillary treatment in your clientele : in the form of cream or lotion do not hesitate to use ULTIMATE HAIR CARE of BQS , it will push thin active principles molecules of cosmetics or medicines : directly to the heart of the hair & in the case of a scalp treatment : directly inside the dermis .
>>The IONS >> have a sterilizing effect, which will relax the hair of your customers, victims of pollution , Chemical excess, bad sleep, stress .
>> The high moisture penetration , coupled with the high temperature and ION , causing long hair staining.
ULTIMATE HAIR CARE is developed based on advanced technology instrument which directly contacts hair with water steam and new generation of ultrasonic producing a never seen micro fog of just 0.26nm, it is the safe and professional hair treatment instrument without the need of treatment cap and machine.
Adopt Taiwan spray gun type spraying technology, rise temperature, humidify hair and increase pressure with open operation, present customized treatment according to the actual demands of hair and scalp with better effect and higher business value for hair repair, hair caring, scalp regulation, for salon.
Before&After:
Operating process：
- Please open the blue knob and add 1000ml pure water.
- Please turn on main power switch and the light on screen will be on.
- Please press TEMP button on screen ( pic 2) and adjust the temperature to 65C.
- Please press TIME button and adjust time according to needs, usually suggesting 20minutes .
- Please press “START/STOP” button.
- After 10 minutes there will be sound of D…D.. giving out from screen, then please take the gun and press the knob on the gun to start work.
Attention notes
- During the process of machine working you are not allowed to open the blue knob to add water.
- After machine works there will be “PAU” showing on the screen. At this time you must press the knob on the gun to work otherwise the machine will automatically turn off after three “PAU” s showing. This design is to protect machine.
- When there is no need for machine to work you must turn off machine in order to protect machine from damage due to over-heat.
- When adding water please press ”START/STOP” to stop working and blow the air in the gun to exhaust pressure; then turn off power supply; and after 5 minutes please open the blue knob to add water. Every time 500ml water is needed.
- Every time 500ml water is consumed you should add 500ml water in the water tank. And make sure that there will be 500-1000ml water in the water tank in order that the machine will not be burned.
6. Every 500ml water can continuously spay vapor for 20 minutes;
7. The water level in the water tank should not be over 1000ml.If the water level is over 1000ml it will cause big sound from machine.
8. You should use pure water, distilled water or nano water. Filtered water and tap water are not allowed.
9. You should not add any essential oil or not pure water into water tank
10.You should add normal temperature water; ice water or hot water is not allowed.
11.If work needs 10 minutes pause please press“START/STOP” to pause work; and if work needs more than 10 minutes pause please press “START/STOP” and turn off the main switch.
12. There will be 10 minutes for gun to do vacuum pumping before spraying vapor. During this time you must make the mouth of gun face the floor, not the human face. After 10 minutes the gun begins to spay vapor.
13. The time of machine continuous work should not be over 30 minutes so as not to make the machine over-heat and be damaged.
14. The gun should be well protected; any rough action is not allowed.
15. When the gun is working the mental tip on the mouth is hot please don’t touch it.
16. Every 15 days when the machine is out of work please open the drain valve under the machine to drain away water
17.If you still have some questions on how to operate the machine please contact supplier.
